Tag: Standard V-DrillGuide

LOUISBURG, KANSAS – Big Gator Tools continues to expand its drill guide line with the introduction of the new Standard V-DrillGuide® (33/64”-5/8”). This drilling accessory allows users to have the precision of a drill press for a fraction of the price without losing accuracy. The Standard V-DrillGuide® (33/64”-5/8”) is expected to debut at the 2021 National Hardware Show October 21-23 in Las Vegas, NV.

This drill bit guide is the 6^th drill guide by Big Gator Tools and the 4th standard version. This marks the 10^th tool designed and patented by Big Gator Tools. Manufacturer Part Number: STD3000DGNP.

“This new Standard drill guide has 8 hole sizes, and is the largest Standard version available going up to 5/8”,” said Bruce Rooney, Owner of Big Gator Tools and designer of the Standard V-DrillGuide® (33/64”-5/8”). “It’s like a portable drill press, very precise. Drill straight, every time.”

The portable Standard V-DrillGuide® (33/64”-5/8”) is easy to use: position the drill guide on the material, clamp, and drill. It can be used on various surfaces.

The Standard V-DrillGuide® (33/64”-5/8”) has 8 holes that will not be worn out because of the rigorous heat-treatment process we use for the steel tool.  These holes are smooth, unlike drilled or reamed holes. The hole sizes and hole alignment marks are permanently embedded onto the guide to allow quick and explanatory drilling sizes. The 8-hole sizes (1/64” increments): are 33/64”, 17/32”, 35/64”, 9/16”, 37/64”, 19/32”, 39/64”, 5/8”.

All of our various V-DrillGuides stand out in the industry and are considered innovative due to the 90° “V-groove” design that runs through the entire guide. The “V-groove” is found on the bottom of the guides that allow users to drill on round or cornered material. The bottom also features a flat base to allow users to work on flat surfaces.

All V-DrillGuides carry a lifetime warranty and are 100% USA-made. Time and money will be saved by drilling a hole once with perfectly aligned holes on wood, plastic, metal or other surfaces.

Product Listing: Click Here

Other sizes include:

Standard V-DrillGuide® (3/8” – 1/2”)            Item #: STD2000DGNP

Standard V-DrillGuide® (1/8” – 3/8”)            Item #: STD1000DGNP

MINI V-DrillGuide®                                            Item #: SDGMINI

Metric V-DrillGuide® (10-14mm)                    Item #: MDG2000NP

Metric V-DrillGuide® (3-9.5mm)                     Item #: MDG1000NP